Calculating the backspace and/or offset of the wheels is important when ordering new wheels, specially if the wheel size changes.
Offset is the distance between hub mounting face and wheel center line.
Track width is the distance between wheel center lines.
Negative offset increases track width, positive offset decreases it.
Backspace (BS) is a measure from wheels machine side edge to hub mounting face.
Offset can be calculated from BS measurement:
e.g. DW18L*38 BS 200 mm
Rim width: 457 mm
Flange width: 21 mm
Offset: 200 – (457/2 + 21) = -50 mm
At LP Wheels we are constantly developing our offering. At the moment we have these sizes available:
DW13Lx24
DW15Lx24
DW16Lx24
DW20Bx26
DW25Bx26
DW15Lx28
DW16Lx28
DW18Lx28
DW20Bx28
DW15Lx30
DW16Lx30
DW18Lx30
DW20Bx30
DW23Bx30
DW21Bx32
DW27Bx32
DW36Bx32
DW44Bx32
DW15Lx34
DW16Lx34
DW20Bx34
DW23Bx34
DW24Bx34
DW25Bx34
DW12x38
DW15Lx38
DW16Lx38
DW18Lx38
DW20Bx38
DW23Bx38
DW25Bx38
DW27Bx38
DW28Bx38
DW30B*38
DW16Lx42
DW18Lx42
DW20Bx42
DW23Bx42
DW25Bx42
DW27Bx42
DW30B*42
DW16Lx46
DW18Lx46
DW20Bx46
DW25Bx46
DW30Bx46
DW16Lx50
AG 16.00*22.5
AG 20.00*22.5
AG 24.00*22.5
AG 20.00*26.5
AG 20.00*26.5 Q-154
AG 24.00*26.5
AG 24.00*26.5 Q-190
AG 28.00*26.5
AG 28.00*26.5 Q-154
AG 24.00*28.5
AG 26.00*28.5
AG 20.00*30.5
AG 24.00*30.5
AG 28.00*30,5
AG 18.00*22.5 TE
AG 20.00*22.5 TE
AG 22.00*22.5 TE
AG 24.00*22.5 TE
AG 20.00*24.5 Q-154 TE
AG 24.00*24.5 Q-190 TE
AG 20.00*26.5 TE
AG 24.00*26.5 TE
AG 24.00*26.5 Q-190 TE
AG 28.00*26.5 TE
AG 20.00*30.5 TE
AG 24.00*30.5 TE
AG 28.00*30.5 TE
W10x24
W12x24
W13x24
W15Lx24
W10x28
W12x28
W13x28
W15Lx28
W18Lx28
W13x30
W8x32
W10x32
W10x34
W12x34
W15Lx34
W18Lx34
W8x36
W10x36
W10x38
W8x44
W10x44
W10x46
W12x46
W13x46
W8x48
W10x48
W12x48
W10x50
W12x50
W15Lx50
W10x52
W10x54
W12x54
Download our wheel catalogue here
The unpainted knurling increases friction between the wheel and tyre, and prevents the tyre from slipping off the wheel when working in heavy conditions. Recommended for forestry wheels. LP Wheels knurling reduces rim slip by almost a third!
Most common valve shelter is the VA valve shelter, it will be added on the wheels if requested.
The R2 valve shelter is for heavier use, used mostly in forestry.
There is a plastic valve plug available for the R2 valve shelter.
Additional holes can be added for attaching dual wheels, wheel weights or for air pressure controlling system.
Different tractor manufacturers have different kinds of wheel weights in use. It is important to know the needed bolt circle (PCD) to secure wheel weights fitting well.
For dual wheels the additional holes are usually placed close to the outer edge of the wheel. It is important to know the amount of the holes needed, but the placing of the additional holes depends on the wheel size. We can give suggestion for the drilling before ordering.
We’re here to help you create the perfect, cost-effective wheels for all of your heavy-duty machines. No matter what kind of equipment or requirements you have, we can create the perfect wheels for you. In addition we are able to manufacture wheels that are produced from special parts. In addition we are able to manufacture wheels that are produced from special parts.
Please contact Nokian Tyres for more information: Where to buy